ENGINEERING GRAPHICS REWRAP TEST 5

DHANALAKSHMI COLLEGE OF ENGINEERING
Chennai 601 301.

ENGINEERING GRAPHICS

REWRAP TEST 5

1. Draw the projections of a straight line AB, 65 mm long when one end A of
the line is 15 mm above HP and 15 mm infront of VP. The angle of
inclinations with HP and VP are 55o and 35o respectively.
(12)

2. A line AB measuring 75 mm long has one of its ends 50 mm infront of VP
and 15 mm above HP. The top view of the line is 50 mm long. Draw and
measure the front view. The other end is 15 mm infront of VP and is above
HP. Determine true inclinations and apparent angles.
(12)

ENGINEERING GRAPHICS REWRAP TEST 4

DHANALAKSHMI COLLEGE OF ENGINEERING Chennai 601 301.
ENGINEERING GRAPHICS REWRAP TEST 4
1. Draw the Plan, Elevation and Right end view of the given block

Elevation = 05 Marks
Plan = 03 Marks
Right End View = 04 Marks.

2. The projections of the different points are shown in the figure 1. Define the position of the points in relation to the reference planes. The distances marked are in millimeters

Figure 1 (12)

ENGINEERING GRAPHICS REWRAP TEST 3

DHANALAKSHMI COLLEGE OF ENGINEERING
Chennai 601 301.
ENGINEERING GRAPHICS
REWRAP TEST 3
1. Draw the Plan, Elevation and Right end view of the block shown in fig 1.


2. Draw the Plan, Elevation and side view of the block shown in fig 2.